Skip to main content

2026

Every post published in 2026, newest first. Pick a month to narrow it down.

Posts
1,343
Topics
124
Reading time
160 h
Active months
6

Posts 1,231–1,260 of 1,343 · October 27, 2026

Page 42 of 45

October 2026

219 posts

Tuesday, October 27, 2026

30 of 107 posts

  1. How to Add a New Screen in Power Apps

    Add a screen to a Power Apps canvas app from the New screen menu: what the layouts are, why a Blank screen suits a container-based design, and how to name the screen so screen readers announce it clearly.

  2. Fixed: "Focus Isn't Showing" in the Power Apps App Checker

    The Power Apps App checker reports Focus isn't showing when a control's FocusedBorderThickness is 0. Give every control people can tab to a visible focus border; a heading that can't receive focus is a different case.

  3. Fixed: "Missing Tab Stop" in the Power Apps App Checker

    The Power Apps App checker reports Missing tab stop when a control it considers interactive has TabIndex below 0. Set TabIndex to 0 for things keyboard users must reach, such as a gallery, but not for a heading label.

  4. Fixed: "Collection Is Initialized but Never Updated" in the Power Apps App Checker

    The App checker warns Collection is initialized but never updated when ClearCollect loads data that the app only reads. Replace the collection with a named formula or a variable; here's how the warning was cleared on a real screen.

  5. Fixed: "Unused Data Sources" in the Power Apps App Checker

    The Power Apps App checker warns This data source is not used in the app. Removing it will improve performance. Remove the data source only if you'll never use it; in the example the warning cleared on its own once a screen used the lists.

  6. Fixed: Delegation Warning. The "Filter" Part of This Formula Might Not Work Correctly on Large Data Sets

    A yellow triangle on a Power Apps gallery and the warning The Filter part of this formula might not work correctly on large data sets mean SharePoint can't run the filter. Here's why, how to find the part at fault, and how a filter with Not was rewritten to delegate.

  7. Fixed: New Control Lands Outside the Gallery Instead of Inside It in Power Apps

    You select a gallery, insert a label, and it appears next to the gallery instead of in every row. Undo, select the gallery's template with the pencil icon, and insert again.

  8. Fixed: "Name Isn't Valid. 'Content' Isn't Recognized" on a Power Apps Badge

    Using Self.Content in a modern Badge's Intent, or reading a badge's Content from another control, gives Name isn't valid. 'Content' isn't recognized. Use the value the badge shows instead, worked out once.

  9. Fixed: "Expected Text Value" for a SharePoint Choice Column in Power Apps

    Power Apps shows Expected Text value when a Text property is set to a SharePoint Choice column such as ThisItem.Level. The column is a record; its text is in .Value. Here's the error, why it happens and the one-word fix.

  10. Build a Career Development Plan App in Power Apps — Part 4: Build the Home Screen

    Build the Career Development Plan app's Home screen: modern controls and a theme, named formulas for the signed-in person, their manager and direct reports, a responsive container layout, and a My team button only managers see.

  11. How to Get the Largest Value in Power Apps with Max

    Find the largest of several numbers, or across a table, with Max in Power Apps: syntax, a real layout example that makes a container as tall as its tallest content, and Min for the opposite.

  12. How to Use Not in Power Apps (Not and !)

    Turn true into false and false into true in Power Apps with Not or the ! operator: the syntax, a real 'is this person a manager?' check, and a tip for seeing the result in Studio.

  13. How to Replace Blank Values in Power Apps with Coalesce

    Use Coalesce in Power Apps to fall back to another value when the first one is blank or an empty string: syntax, a first-name-or-full-name example from Microsoft 365, and how it compares with If and IsBlank.

  14. How to Join Text in Power Apps with & and String Interpolation

    Join pieces of text in Power Apps two ways: the & operator and $"...{formula}..." string interpolation. Same result, side by side in Studio, plus spacing, braces and when to use which.

  15. How to Join Table Values into Text in Power Apps with Concat

    Turn a column of a table into one line of text in Power Apps with Concat: syntax, a separator, real examples from a SharePoint list and Office 365 Users, and how Concat differs from Concatenate and &.

  16. How to Sort a Table in Power Apps with Sort

    Put the rows of a table in order with Sort in Power Apps: by a column, ascending or descending with SortOrder, by a formula, and together with Filter, with real results from Office 365 Users.

  17. How to Filter a Table in Power Apps with Filter

    Keep only the rows you want from a SharePoint list, a connector or any table with Filter: the syntax, a filter on a SharePoint list, a true-or-false column filter, combining conditions, and delegation.

  18. How to Use the If Function in Power Apps

    Show one thing or another in a canvas app with If: the syntax, an else value, several conditions in one If, what happens without an else, and real examples that pick a message based on missing data.

  19. IsBlank vs IsEmpty in Power Apps (and the Blank Function)

    When to use IsBlank and when to use IsEmpty in Power Apps: IsBlank checks a value or record, IsEmpty checks whether a table has rows. Plus Blank() to make an empty value on purpose, with real results from Studio.

  20. How to Handle Errors in Power Apps with IfError

    Replace an error with a sensible value in Power Apps with IfError: at the point of use or inside a named formula, how type matching works, FirstError, and why the error banner disappears.

  21. How to Count Characters in Power Apps with Len

    Count the characters in a piece of text in Power Apps with Len: see the result in Studio, spot hidden spaces, check a maximum length before saving, and tell an empty string from text.

  22. How to Remove Extra Spaces in Power Apps with Trim and TrimEnds

    Remove stray spaces from text in Power Apps: Trim removes them everywhere except single spaces between words, TrimEnds only at the start and end. See the difference with Len, and why it matters when matching text.

  23. How to Get a User's Direct Reports in Power Apps (DirectReportsV2)

    List the people who report to someone with Office365Users.DirectReportsV2: why you need .value, how to select fields, keep only enabled accounts, sort by name, and check whether someone is a manager.

  24. How to Get a User's Manager in Power Apps (ManagerV2)

    Get anyone's manager from Microsoft 365 in a canvas app with Office365Users.ManagerV2: by email or Entra ID, with $select, for the signed-in user, and safely for people who have no manager.

  25. How to Get the Current User's Profile and Job Title in Power Apps (MyProfileV2)

    Read the signed-in person's job title, first name, email and Entra ID from Microsoft 365 with Office365Users.MyProfileV2, ask only for the fields you need with $select, and keep it in a named formula.

  26. How to Get the Current User in Power Apps with the User Function

    Get the signed-in person's name, email, Entra object ID and photo in a canvas app with User(), see each value in Studio, and know when you need Office 365 Users instead.

  27. How to Test a Power Apps Canvas App on Phone and Tablet Sizes

    Check a responsive canvas app at phone, tablet and desktop sizes without a device: the preview's Phones and Tablets lists, and the Default, Large, Medium and Small canvas sizes in Power Apps Studio.

  28. How to Preview a Canvas App in Power Apps Studio

    Run your canvas app inside Power Apps Studio with Preview (F5), close it with Esc, and test single controls on the canvas with the Alt key, without publishing anything.

  29. How to Show or Hide a Control in Power Apps with Visible

    Show a control only when a condition is true with the Visible property: write a true-or-false formula, see the result in Studio, how containers close the gap, and why hiding isn't security.

  30. How to Add an Icon to a Button in Power Apps

    Put a Fluent icon on a modern Power Apps button: pick one from the Icon box or type its name, place it before or after the text, switch between outline and filled, and make icon-only buttons accessible.